Copyright © 2026 AudiologyOnline - All Rights Reserved

AudiologyOnline Phone: 800-753-2160

Exam Preview

Fitting Tools in the Inspire Software

View Course Details Please note: exam questions are subject to change.
Print

1.  The Firmware Updater allows you to do what:
  1. Update your patients' hearing aids based on the latest advancements to the chip
  2. Change the matrix in a hearing aid
  3. Add multiple memories to a hearing aid
  4. All of the above
2.  What test settings can be used in the Hearing Aid Test function?
  1. Full on gain with all features disabled
  2. User gain with all features disabled
  3. User gain with all features enabled
  4. User gain with selected features enabled
  5. All of the above
3.  What is the name of the fitting tool that guides you through all necessary steps to customize your initial fit in less than 2 minutes?
  1. Fitting Wizard
  2. Auto Path
  3. Auto Set
  4. Fit Assist
4.  When performing Live Real Ear Measurements with Inspire, how far beyond the sound bore opening should the probe tube set?
  1. 2mm
  2. 3mm
  3. 5mm
  4. 7mm
  5. It doesn't matter where you place the probe tube
5.  At what level presentation level is the Real Ear Measurement completed IN AUTO PATH:
  1. 90dB
  2. 80dB
  3. 75dB
  4. 65dB
6.  After Strategic Feedback Control is initialized, what are you able to view through that application?
  1. Potential for feedback in dB per channel
  2. Potential for feedback through omni microphone setting
  3. Potential for feedback through directional microphone
  4. Potential for feedback in each memory
  5. All of the above
7.  Which of the following is NOT true regarding data log:
  1. It can take audio recordings through the hearing aid
  2. It tracks percentage of use for each Acoustic Landscape
  3. It tracks percentage of time spent in directional or omni mode
  4. It gives recommendations for changes to settings based on patient usage patterns
8.  What choices are available for our Experience Manager:
  1. Step A, Step B, Step C
  2. First time user, experienced user, previous analog user
  3. Experienced, Familiar, Inexperienced
  4. Initial fit, follow up, 1 year check
9.  Which of the following tools allows you to measure soft and loud sounds (setting dynamic range) for your patient:
  1. Auto Path
  2. Experience Manager
  3. Expert Assistant
  4. Verify Comfort
  5. All of the above
10.  Which of the following is true regarding the Expert Assistant in Inspire:
  1. You can view standard or advanced
  2. In the advanced view, you can see all possible options at once
  3. You can choose to have the media player launch automatically
  4. The media player file will update automatically with each category selection in expert assistant
  5. All of the above