Copyright © 2026 AudiologyOnline - All Rights Reserved

AudiologyOnline Phone: 800-753-2160

Exam Preview

Module Two Neuromonics Training (General Credit)

View Course Details Please note: exam questions are subject to change.
Print

1.  What functions does the Neuromonics Clinic software perform?
  1. Data logging
  2. Transition from Phase 1 to Phase 2 of treatment
  3. Set minimum volume
  4. ALL of the above
2.  To connect the Oasis device to the computer, you must
  1. Have the device plugged into the charger
  2. Press both the end and begin buttons so that the device reads "no link"
  3. Both A and B
  4. Neither
3.  Neuromonics states the following is true regarding the assessment of, and need for, Loudness Discomfort Levels (LDLs) measurements:
  1. Due to the fact that the measurement procedure for LDL can have a significant impact on results it is imperative that the same testing procedure be used every time to accurately test changes in LDLs
  2. LDL data in conjunction with history are used to determine indications of Decreased Sound Tolerance and Hyperacusis
  3. LDLs need to be measured at 500, 1k, 4k, in each ear
  4. LDL measurement is optional for a patient’s tinnitus pitch match frequency or any other frequency at a clinician’s discretion
  5. All of the above
4.  Vertical patterns with volume usage on the data log can indicate:
  1. Appropriate device usage
  2. "Click counting" on the volume control
  3. Volume is set too high
  4. Volume is set too low
5.  The correct step sequence to access the "show volume" feature is:
  1. Press "begin" and "end" buttons simultaneously, then press the up (+) volume button
  2. Press the "begin" volume and the up (+) volume button at the same time
  3. There is no option to "show volume"
  4. None of the above
6.  What frequencies are required according to the Neuromonics assessment protocol?
  1. 250, 500, 750, 1000, 1500, 2000, 3000, 4000, 6000, 8000, 9000, 10k and 12.5k Hz
  2. 250, 500, 750, 1000, 1500, 2000, 3000, 4000, 6000, 8000,
  3. 250, 500, 1000, 2000, 4000, 8000, 10k and 12.5k Hz
  4. 250, 500, 1000, 2000, 3000, 4000, 6000, 8000, 10k and 12.5k Hz
7.  The "Clinician’s Guidelines" is a resource for specific information regarding Neuromonics tinnitus assessment procedures for:
  1. Residual Inhibition measurement only
  2. Tinnitus questionnaires only
  3. Loudness Discomfort Level measurement only
  4. All required tinnitus measurements
  5. None of the above
8.  The Neuromonics Clinic Software Manual includes information including:
  1. Downloading and interpreting logged data
  2. Setting the minimum volume
  3. Changing the phase of therapy
  4. B and C
  5. All of the above
9.  What type of stimulus is used to test Residual Inhibition?
  1. Broad Band Noise presented between 65-75 dB HL
  2. Narrow Band Noise at the tinnitus pitch between 65-75 dB HL
  3. Narrow Band Noise at 4000 Hz between 65-75dB HL
  4. Narrow Band Noise at the tinnitus pitch 20 dB SL
10.  When looking at the data logging screen, the musical tracks are which symbol?
  1. Blue dots
  2. Green triangles
  3. Black rectangles
  4. Green, red, blue and purple bars