Exam Preview

Verification with Phonak: Step by Step

---

1.  Which version of Phonak Target is required to fit CROS II? Phonak Target 2.1 Phonak Target 1.2 Phonak Target 4.1 Phonak Target 3.0 None of the above

2.  Where can the Verification assistant be found under the Fine tuning tab? SoundRecover Program options TK/Gain 35 dB Gain & MPO Automatic Fine Tuning

3.  Where would you go to change the fitting formula in Phonak Target? Basic Tuning FineTuning Audiogram Direct Device options None of the Above

4.  When should SoundRecover be verified? Prior to matching target/ensuring audibility After matching target/ensuring audibility At the first follow up appointment both A and C None of the Above

5.  Which frequency is a good substitute or correlate for female /s/? 3150 Hz 4000 Hz 4500 Hz 6300 Hz 2700 Hz

6.  When verifying a CROS/II fitting, the better ear and poorer ear response should be: Identical Better ear greater output Poorer ear greater output Better ear more high frequency output None of the above

7.  Why do we need verification? To assure adequate audibility for soft and average speech sounds (and/or gain relative to a target) To assure estimated or measured UCLs/MPO are not exceeded To provide independent verification of hearing instrument function including advanced features All of the above None of the above

8.  By how much should the /s/ and /sh/ be separated by? At least 200 Hz Preferably 500 Hz 100 Hz Both A and B 700 Hz

9.  The probe tube should be placed within ___ of the TM: 4mm 5mm 6mm 7mm 8mm

10.  When verifying a CROS/II fitting, and the response is not ideal: Check the position of the speaker Check the position of the instrument on the ear Check the programming of the CROS system All of the above None of the above