AudiologyOnline Phone: 800-753-2160


Exam Preview

Phonak Target Software: What's New?

View Course Details Please note: exam questions are subject to change.


1.  Which is NOT a new feature in Target 5.1?
  1. Benefit Demonstrator
  2. Binaural acoustic parameter selection
  3. AOV codes
  4. Receiver Check
  5. Phonak Store connection
2.  Automatic selection of experience level includes the following:
  1. Experience level based on fitting data
  2. Automatic functionality available for all new fittings
  3. Available for the Adaptive Phonak Digital fitting rationale
  4. Answers A and C
  5. Answers A, B, and C
3.  Settings for expansion are determined by:
  1. the patient's hearing loss
  2. the gain settings in the current program
  3. the internal noise level of the current program
  4. the acoustical coupling
  5. all of the above
4.  The precalculation for patients with asymmetric hearing loss is present to:
  1. reduce discomfort in the poorer ear
  2. increase audibility in better ear
  3. reduce potential masking effect in the better ear
  4. address issues with first time users primarily
  5. all of the above
5.  What percentage of hearing aids sent back to Phonak for repair have a different receiver on them than what is indicated in the software?
  1. 20%
  2. 25%
  3. 10%
  4. 15%
  5. 5%
6.  Which feature will allow gain to increase automatically as your patient adjusts to their hearing instruments?
  1. Audiogram Direct
  2. Receiver Check
  3. Auto Acclimatization
  4. Target Match
  5. None of the above
7.  Where in Target software can you change the functionality of the push button and volume control?
  1. in Instruments
  2. in Global Tuning
  3. in Fine Tuning
  4. in Datalogging
  5. in Device Options
8.  What is the new feature in Target 5.1 for SoundRecover2?
  1. two cut off thresholds
  2. a more adaptive algorithm based on input signal
  3. the ability to activate frequency compression as low as 800Hz
  4. Individual ear SoundRecover 2 calculations
  5. defaulting on or off based on hearing loss
9.  Where is SoundRecover2 found in the fitting software?
  1. in Global Tuning
  2. in Fine Tuning
  3. in Datalogging
  4. in Device Options
  5. in Audiogram Direct
10.  What is not possible to do with TargetMatch?
  1. Interface with Verifit2
  2. Interface with Auricle FreeFit Otosuite
  3. Have a guided prob tube placement
  4. Measure and match gain to target curves automatically
  5. Program RECD measurements in a test box via Phonak Target software

Our site uses cookies to improve your experience. By using our site, you agree to our Privacy Policy.