AudiologyOnline Phone: 800-753-2160


Exam Preview

ReSound Advanced Technology Series: Acceptance Manager

View Course Details Please note: exam questions are subject to change.


1.  Research on acclimatization indicates
  1. patients always accept amplification settings at the first fitting.
  2. patients can take time to accept amplification and could benefit from gradual gain adjustments
  3. patient gain adaptation can be done at follow-up visits or with automatic adjustments
  4. B & C
2.  Research has indicated that patients
  1. need guidance to achieve the appropriate gain adaptation.
  2. can always adjust their hearing aid fitting to maximum benefit if given the correct tools.
  3. want the same gain settings and one fitting rule can be applied for all fittings.
  4. reject the opportunity to personalize their hearing aid experience.
3.  The Acceptance Manager duration is the
  1. time that the feature will adapt to final settings assuming a day is an 8 hour wear time.
  2. time that the feature will adapt to final settings assuming a day is a 12 hour wear time.
  3. time that the feature will adapt to final settings assuming a day is a 16 hour wear time.
  4. time that the feature will take to adapt the patient to accepting the devices.
4.  When activating Acceptance Manager, the gains are
  1. increased from the current setting in percent up to 125% of current gain
  2. increased from a reduced percentage (maximum 50%) to the current gain setting.
  3. entered manually and saved as the start and end points
  4. either A or B
5.  The Acceptance Manager feature can used to increase gains to REM verified gains if
  1. the REMs are conducted before the feature activation, are set as 'current dB', and too-loud is selected as the setting.
  2. the REMs are conducted before the feature activation, are set as 'current dB', and the comfortable for patient is selected.
  3. the REMs are conducted and adjustments are made after the feature is activated.
  4. the REMs are made and documented but the gain values are not adjusted in the fitting software.
6.  Progress can be
  1. Advanced with the progress slider
  2. Reversed with the progress slider
  3. Stopped at any time by turning off the Acceptance Manager
  4. All of the above
7.  If the Acceptance manager is deactivated before final gain targets are obtained, the gain can be set to match only
  1. current values
  2. end-point values
  3. current values or end-point values
  4. Current values, end-point values, or starting-point values
8.  The Preview button
  1. allows the patient to preview the gain adaptation in real time.
  2. allows the patient to hear how the device will sound after the Acceptance Manager is finished.
  3. will graphically show in the fitting software how the gain will adapt during the duration.
  4. will play a video of how the Acceptance Manager feature was deigned.
9.  If a patient reacts to prescribed gain settings on the hearing aids being too loud at the first fitting,
  1. the gains can be reduced for patient comfort and a successful fit will always be obtained.
  2. the gains can be reduced for patient comfort and follow-up visits should consider increasing the gains to provide more audibility and benefit.
  3. the Acceptance Manager could be used to increase comfort at the first fitting and automatically adapt the hearing aids over time to prescribed gain settings gains
  4. B & C
10.  If a patient is using ReSound LiNX 3D and no longer desires to use the Acceptance Manger it could be deactivated by
  1. the ReSound Smart 3D app.
  2. the patient coming in for an appointment for it to be de-activated.
  3. a ReSound Assist remote fine tuning could be sent to the patient.
  4. Both B & C

Our site uses cookies to improve your experience. By using our site, you agree to our Privacy Policy.