AudiologyOnline Phone: 800-753-2160


Exam Preview

Advanced Software Training

View Course Details Please note: exam questions are subject to change.


1.  What are three patient considerations used by NAL-NL2?
  1. Height, weight, and age
  2. Gender, age and amplification experience
  3. Age, weight and hearing loss
  4. Gender, height and amplification experience
2.  Which part of the feedback management system is looking for fit related feedback?
  1. Phase canceller
  2. AntiShock
  3. Feedback Optimization test
  4. None of the above
3.  What is the purpose of the Sound Conductor?
  1. To allow for more stable gain
  2. To provide a balance of Noise Reduction and Wind Management
  3. To proivde just the right balance of Noise Reduction and Speech Enhancement
  4. To provide just the right balance of Noise Reduction and Speech Enhancement in each environment
4.  What is the best way to deal with entrainment artifacts?
  1. Adjust the Phase Canceller setting from Max to Mild
  2. Adjust the Sound Conductor settings to a higher setting
  3. Adjust the Automatic Controls tab
  4. Adjust your compression ratios to a more linear setting
5.  How could you deal with a patients complaint that they aren't hearing well in background noise?
  1. Adjust the Sound Conductor settings for Conversations in a Small Group
  2. Adjust the Sound Conductor settings for Conversations in a Crowd
  3. Adjust the Sound Conductor settings for Conversations in Noise
  4. B & C
6.  Which scenario would the Guided Fitting be best suited for?
  1. First fitting
  2. First fitting of FLEX:trial devices
  3. Follow-up visits
  4. A & B
7.  Which is the default for Frequency Compression in Tempus products (except Max)?
  1. On by default
  2. Off by default
  3. It depends on the hearing loss
  4. Frequency compression is not an option.
8.  What is one difference between a gain and an output graph?
  1. There are not differences
  2. There are MPO curves on an output graph
  3. There are MPO curves on a gain graph
  4. You can see adaptive features on an output graph
9.  What adjustment can you make with the Automatic Adaptation Manager?
  1. You can turn it off
  2. You can adjust the current and end values
  3. You can adjust the adaptation rate
  4. All of the above are correct
10.  What consideration should you factor in when accessing the Tuning screen within Unitron Truefit v3.7
  1. The software will default to allow adjustments for the SoundNav/Automatic program
  2. The software will always default to adjusting the Conversations in Quiet program
  3. The software will always default to adjusting all programs
  4. The software will default to allow adjustments for the Manual program(s)

Our site uses cookies to improve your experience. By using our site, you agree to our Privacy Policy.