Copyright © 2025 AudiologyOnline - All Rights Reserved

AudiologyOnline Phone: 800-753-2160

Exam Preview

Capella2 - Orientation & Training

View Course Details Please note: exam questions are subject to change.
Print

1.  The Capella2 is powered using:
  1. power cord directly into the wall
  2. bluetooth connection to PC
  3. USB connection to PC
  4. magic
2.  What calibration choices do you have using the Capella2?
  1. Chirp
  2. Chirp2
  3. inSitu
  4. A & C
3.  PrecisePoints allows you to:
  1. pick any test frequency while you are testing
  2. customize your testing frequencies
  3. customize intensities
  4. know your gps location
4.  Doing a probe fit before running the test allows you to:
  1. insure you have a proper probe fit before you start the test
  2. note if there are any perforations of the tympanic membrane
  3. can be used as a teaching tool by preceptors
  4. all of the above
5.  Historical comparisons allows you to:
  1. look up past US presidential information
  2. look up PMM information
  3. see past test and probe fit data if you are using an EMR system
  4. none of the above
6.  In Otosuite, Capella2 results that fall above the "normative" grey area, meets the signal to noise ratio, and noise floor criterion will indicate:
  1. absent OAEs
  2. present OAEs
  3. too much noise
  4. none of the above
7.  A high probe fit correlation indicates:
  1. probe out of ear
  2. good fit
  3. occluded fit
  4. poor probe fit
8.  What are some steps you can take if you have a high noise floor?
  1. make sure the patient is calm, relaxed, and not making noise
  2. reseat the probe
  3. replace probe tip
  4. all of the above
9.  What can you do if your unit intermittently disconnects?
  1. check your USB suspend settings and set to disabled
  2. check your probe for occlusion
  3. restart Otosuite
  4. none of the above
10.  What tests are you able to perform using the Capella2?
  1. DPOAEs & I/O DPOAEs
  2. TEOAEs
  3. Spontaneous OAEs
  4. all of the above