Exam Preview

Advanced TrueFit v4.3 Software Training

---

1.  What is one difference between a gain and an output graph? There are no differences There are MPO curves on a gain graph There are MPO curves on an output graph You can see adaptive features on an output graph

2.  What is required to use remote adjust? Unitron hearing instruments Activation of Coach Activation of Ratings Activation of Insights

3.  Which part of the feedback management system is looking for fit related feedback? Phase canceller AntiShock Feedback Optimization test Device Acoustics

4.  What is the purpose of the Sound Conductor? To allow for more stable gain To provide a balance of Noise Reduction and Wind Management To provide just the right balance of Noise Reduction and Speech Enhancement To provide just the right balance of Noise Reduction, Speech Enhancement and microphone strategy in each environment

5.  How could you deal with a patient’s complaint that they aren’t hearing well in background noise? Adjust the low frequency gain in all SoundNav Adjust the Sound Conductor settings for Conversations in a Small Group Adjust the Sound Conductor settings for Conversations in a Crowd Adjust the Sound Conductor settings for Conversations in Noise C & D

6.  What is the best way to deal with entrainment artifacts? Adjust the Phase Canceller setting from Max to Mild Adjust the Sound Conductor settings to a higher setting Adjust the Automatic Controls tab Adjust your compression ratios to a more linear setting

7.  Which is the default for Frequency Compression in Discover Next products? On by default Off by default It depends on the hearing loss Frequency compression is not an option

8.  What adjustment can you make with the Automatic Adaptation Manager? You can turn it on You can adjust the current and end values You can change the rate of adaptation All of the above

9.  What are three patient considerations used by NAL-NL2? Height, weight and age Age, weight and hearing loss Gender, age and amplification experience Gender, height and amplification experience

10.  What consideration should you factor in when accessing the Tuning screen within Unitron TrueFit? The software will always default to adjusting all programs The software will default to allow adjustments for the SoundNav/Automatic program The software will always default to adjusting the Conversations in Quiet program The software will always default to adjusting for the Manual program(s)