Exam Preview

Phonak Target: Navigating Through a First Fit

---

1.  Which is not a new feature in Target 5.0? Benefit Demonstrator Pulsed tones in Audiogram Direct AOV Codes Receiver Check Phonak Store Connection

2.  Benefit Demonstrator allows you to demo: Monaural vs. binaural fittings Basic vs. premium fittings Restaurant settings in different technology levels Phone calls in different technology levels All of the above

3.  Settings for expansion are determined by: the patient's hearing loss the gain settings in the current program the internal noise level of the current program the acoustical coupling all of the above

4.  The precalculation for patients with asymmetric loss is present to: reduce discomfort in the poorer ear increase audibility in the better ear reduce potential masking effect in the better ear address issues with first time users primarily all of the above

5.  What percentage of hearing aids sent back to Phonak for repair have a different receiver on them that what is indicated in the software? 20% 25% 10% 15% 5%

6.  Which feature will allow gain to increase automatically as your patient adjusts to their hearing instruments? Audiogram Direct Receiver Check Auto Acclimatization Target Match none of the above

7.  Where in Target software can you change the functionality of the push button and volume control? in Instruments in Global Tuning in Fine Tuning in Datalogging in Device Options

8.  What is not a new feature in SoundRecover2? two cutoff thresholds a more adaptive algorithm based on input signal the ability to activate frequency compression as low as 800Hz one cutoff threshold defaulting on or off based on hearing loss

9.  Where is SoundRecover2 found in the fitting software? in global tuning in fine tuning in datalogging in device options in Audiogram Direct

10.  Which model of Belong does not have the long press option in the device options tab? Audeo B 13 Audeo B 10 Audeo B 312 Aueo B-R Audeo B 312T